ENGINE
JOHN DEERE 6068 TF 485, tier 3.
6-cylinder water-cooled turbo engine. Side
mounted radiator for engine and transmission.
Variable speed hydraulic fan with
temperature control.
Cylinder volume: ............6.8 litres (415 in³)
Torque at 1200 rpm: ......838 Nm (618 lbf ft)
Output at 1600 rpm: ......137 kW (186 hp)
Fuel tank: .......................160 litres (42 US gal)
POWER TRANSMISSION
IQAN-controlled, hydrostatic/mechanical
transmission with power control. Two-speed
drop box with disengagable
wagon drive and electronic fast shifting.
Gear driven bogies with manually operated
differential lock.
Traction: .....................168 kN (37 800 lbf)
Speed, gear 1: ..........0–9 km/h (0–5,6 mph)
Speed, gear 2: .......0–25 km/h (0–15,5 mph)
BRAKES
Dual circuit hydraulic wet disk brakes,
automatic loading brake. Spring loaded
parking and emergency brake.
WHEEL EQUIPMENT
6 WD
Front: ................. 600/65 x 34 T422 SB*
710/55 x 34 T422 SB
Rear: ...................600/55 x 26.5 T428 SB*
710/45 x 26.5 T428 SB
8WD.....................600/55 x 26.5 T428 SB
710/45 x 26.5 T428 SB
*) standard
HYDRAULIC SYSTEM
The machine has separate systems, one
for transmission and one for working
hydraulics. Load sensing hydraulic system
with fi lters in return line and leakline.
Extra fi ne fi lter circuit (3 µ) with water
separation.
Pump capacity: ..........210 litres / 1 500 rpm
(55 US gal)
Working pressure: ....3–21 Mpa (440–3050 psi)
Filtration grade: ......10 µ abs (10 micron)
Tank volume: ..........120 litres (32 US gal)
|
|
ELECTRICAL SYSTEM
24 volt electrical system with IQAN
control and monitoring system.
System voltage: ............................24 V
Alternator: ....................................2 x 55 A
Battery: ..........................................2 x 115 Ah
Working light: ...............................22 x 70 W
STEERING
Articulated steering joint of ball race type
with double acting cylinders. Steering
wheel control by orbitrol, proportionally
controlled off-road steering.
Max. steering angle: .........±43°
Max. steering torque: ....... 56,8 kNm
(41900 lbf ft)
FRAMES
Welded puller frame with steering joint
of ball race type and built in steering
cylinders. Stabilizer using 2 cylinders.
Wagon with central frame and 4 bunks.
Front gate is adjustable 600 mm (24 in)
horizontally and 400 mm (16 in) vertically.
Loading area: .............timber 4.5 m² (48 ft²)
Loading area: .............pulp 5.5 m² (59 ft²)
CAB
Rubber mounted welded safety cab with
very good visability. Polycarbonate glasing
in the rear and rear side windows.
Air suspended, electrically heated drivers
seat with waist safetybelt. Air conditioning
system with automatic ACC control and
pollen fi lter. Hydraulic running board.
Sound level below 75 dBA.
|
|
LOADER
RK 120
Knuckle boom loader with fi xed tower.
Swing base with dual slew cylinders.
1.4 m extension and endless rotator.
Hultdin Grapple SG 360.
Lifting torque, gross / net .... 120 / 96 kNm
(88 500 / 70 800 lbf ft)
Torque:......................17.5 kNm (12 900 lbf ft)
Slewing arc:...............375°
Reach:.......................7,1 m (23 ft)
DIMENSIONS, WEIGHT, AND
LOAD CAPACITY
Length: .....................9 650 mm (380 in)
Width: .......................2 550 mm (100 in)
Transport height: ......3 730 mm (147 in)
Ground clearance:.....612 mm (24 in)
Distance, gate- bogie centre:.. 2 500 mm
(98 in)
Service weight: ..........15 500–17 400 kg
(34 200–38 400 lbs)
Loading capacity: ......14 000 kg (30 900 lbs)
EQUIPMENT
Standard:
Fire extinguisher. Service equipment
including technical documentation and
complete tool set. Radio with CD-player.
Extra:
Engine/cab preheater with heating coil
for hydraulic tank. Skylight windows, sun
visors. Dozer blade. Bogie lift. Xenon
working light. Sprinkler system. Air vent
driver seat. Electronic filter indication.
Vacuum pump. Cyclone precleaner.
Rear vision system. Double telescope.
Biodegradeable oil. Chains. Tracks.
|
