ENGINE
JOHN DEERE 4045 HF 485, Tier 3.
4 cylinder,water cooled turbo engine with intercooler
Cylinder volume: ..........4,5 liters (274 inł)
Torque at 1400 rpm: ....645 Nm (476 lbf ft)
Output at 1800 rpm: .....116 kW (156 hp)
Fueltank: ....................260 litres (70 US gal)
POWER TRANSMISSION
Fully hydrostatic with two-steps wheel
motor in each wheel and high/low gear
gives 3 gears. Electronic control system for
transmission and levelling. Differential lock
steplessly adjustable through hand
potentiometer.
Tractive force: ......75 kN (16 800 lb)
Speed [L]: ..............0–7,5 km/h (0–4.7 mph)
Speed [H]: .............0–25 km/h (0–15.5 mph)
BRAKES
Negative wet multi-disc brakes in the
wheel motors, proportional controlled via
a brake pedal. Spring assisted parking and
emergency brake.
WHEEL EQUIPMENT
The machine is with standard wheel
equipment 2050 mm (81 inch) wide.
Front/rear: ...............500/65 x 26,5 T425*
600/55 x 26,5 T428
(standard*)
HYDRAULIC SYSTEM
The machine has two separate systems.
One for the transmission and one
for the working hydraulics.
Working hydraulics:
Load sensing constant pressure system
with return fi lter and leak fi lter.
Seperate fi ne fi ltering system (3 micron)
with water separation.
Pump capacity: ......230 l/1700 rpm (61 US gal)
Working pressure:.....25.0 Mpa (3625 psi)
Filtering degree: .....10 µ abs (10 micron)
Tank volume: ..........140 l (37 US gal)
|
|
ELECTRIC SYSTEM
Rottne D5 machine control system
Steplessly adjustable engine working speed
in the computer .
System voltage: ...........................24 V
Alternator: ....................................2 x 55 A
Battery: ........................................2 x 115 Ah
Working light: ..............................18 x 70 W
STEERING
Hydraulically controlled articulated
steering joint with double steering
cylinders.
Max steering angle: ............+/- 45°
Max steering torque:.30,1 kNm
(22 200 lbf ft)
FRAMES
Fully welded conical centre frames with
built-in tanks. Automatic level control
through hydraulically controlled casted
wheel arms. The machine has automatic
stabilizing lock.
Tilting angle lengthwise: .........+/- 17°
Tilting angle sideways: ............+/- 31°
Ground clearance,....200 –1000 mm (8–39 in)
CAB
Anti-vibration safety cab (ROPS, FOPS according
to ISO-standard) with Lexan in all
screens. The cab has a climate system with
automatic control (ACC) and sun-blinds.
Air-sprung, electrically heated operator’s
seat with Airvent, headrest, seat belt and
adjustable wide arm rests. Control panels
have mini-levers with extra push buttons
for fl exible head control. Parallel operating
wiper with interval control and washers on
the front and side screens. Radio with CDplayer.
Roof and fl oor lighting with door
switch and reading lamp on a fl exible arm.
The measuring system’s printer is integrated
in the roof panel.
Noise level .....................................67 dBA
|
|
LOADER
Parallel-acting knuckle boom loader with
tiltable loader base and hydraulic extension
arm with 1,4 metre stroke.
RK 50:
Tilting angle loader base: ........-15 ° / +20 °
Lifting torque, gross / net......... 80/53 kNm
(59 000/39 100 lbf ft)
Slewing arc ................230 °
Torque .......................12 kNm (8 850 lbf ft)
Outreac: ......................7 m (23 ft)
HEAD
EGS 405:
Pendulum mounted with rotator GV4.
One fi xed and two movable pair of knives
where the lower pair is proportionally
controlled. Solid feeding wheels with
integrated anti skidd device. Automatic
chain tensioning and proportional chain
lubrication (oil as per tree diameter)
Saw diameter ...............max 450 mm (18 in)
Delimbing diameter ......40–400 mm (2-16 in)
Max wheel opening ......400 mm (16 in)
Feeding force ...............12,7 kN (2 860 lbf)
Feeding speed ..............4,0 m/sec (13 ft/sec)
Weight ..........................480 kg (1050 lb)
MEASURING AND
CONTROL SYSTEM
ROTTNE D5
Microprocessor based control and cross
cutting system in PC environment with
value and distributed cross-cutting.
The system units are interconnected via
a CanBus Communication via USB,
memory stick, modem or laptop PC.
WEIGHT
Service weight .............8 500 kg (18 740 lb)
EQUIPMENTS
Standard: Engine/cab preheater with
oil tank heating coil.Electric filler pump.
Service equipment with technical
documentation and complete tool kit.
Extra: Engine/cab preheater with tank
heating coil. Rear vision system.
Sprinkler system. Xenon working light.
Orbitrol steering. Computer calliper.
Colour marking system. Stump spray
equipment. Liquid fi lled tyres.
Biodegradeable oil. Chains.
|
