Rottne H-14 an operating experience!

ROTTNE H-14 has a turbo engine of 225 hp with a 
common rail injection system and 4 valves per cylinder. 
The hydrostatic transmission with two mechanical
gear stages works smoothly and willingly
with a high tractive force, which gives
the harvester excellent operating characteristics.

The modern harvester cab offers superb driver comfort 
with air-sprung seat, wide armrests with lever panels that 
are individually settable as well as air conditioning
with ACC control. The driver has fantastic
all-round visibility as the cab can be
swivelled and levelled and he determines
himself whether this is done automatically
via the IQAN computer or manually via
the joystick.

Automatic cab swivelling means that the
cab gradually follows the loader’s swing
movement to the left or right sides. In addition
to the lever panels, the cab also features
manoeuvring buttons and controls
well placed on the instrument panels on
the side and in front of the operator.

The new swing base, which is adapted to
the H-14, has given the popular harvester
loader RK 140 a greater swing force as
well as a larger forward tilt angle.
The new extension with a maximum
stroke of 3.2 meters, has a cylinder with
integrated fast speed valve and a stroke
length limiter that is controlled by the size
of the head mounted on the harvester.

EGS 590, which is a new head, has a
maximum cutting diameter of 60 centimetres
and stem feed with 3 feed rollers.
The 2 moving feed roller arms swing in
towards the frame so that these rollers
press the stem against the 3rd feed roller
located inside the head frame.

Desktop wallpaper
Click below to open a larger Rottne H-14 image,
which can be used as wallpaper on your desktop.
There are 2 different pixel options to choose from.

1280x1024

1024x768

ENGINE
JJOHN DEERE 6068 HF485, Tier 3.
6-cylinder, water-cooled turbo engine with intercooler.
Cylinder displacement....6,8 litres (415 in³)
Torque at 1400 rpm .....1025 Nm (682 lbf ft)
Output at 1800 rpm ...168 kW (225 hp)
Fuel tank ......................460 litres (122 US gal)

TRANSMISSION
Hydroststic/mechanical with load control. 
Rottne D5 machine control system.
2-speed transfer gearbox.
Bogie up front and singleaxle rear, 
both with manual differential lock.
Tractive force ...............168 kN (37 800 lbf)
Driving speed gear 1......0-10 km/h (0-5,6 mph)
Driving speed gear 2.......0-25 km/h (0-15,5 mph)

BRAKES
2-circuit hydraulic wet multi-disc brake,
automatic working brake.Spring assisted
parking and emergency brake.

WHEELS
Front ....................................710/45 x 26,5
Rear ..................................... 710/55 x 34

HYDRAULIC SYSTEM
Fully independent transmission and
working hydraulic systems.
Working hydraulics:
Load sensing system with return and
leakage oil fi lters fi tted horizontally under
the oil level in the lower part of the tank.
Self-venting. Fine filter circuit with water
separation. Electric fi lling pump and
vacuum pump.
Pump capacity.......323 litres/1700 rpm (85 gal)
Working pressure ...3.0-25.0 Mpa (440-3625 psi)
Degree of fi ltration.......10 micron
Fine fi lter circuit ........... 3 micron
Tank volume ...................200 litres (53 US gal)

ELECTRICAL SYSTEM
24 volt electrical system with Rottne D5
control and monitoring system.
Foldable roof ramp.
System voltage ....................... ..24 volt
Alternator ................................. 140 A
Battery ...................................... 2x145Ah
Working lights.........................… 21x70 W

STEERING
Articulated joint with double acting cylinders.
Steering angle ............+/- 43º
Steering torque ..........61.3 kNm (45 200 lbf ft)
Horizontal angle ........+/- 25º

FRAMES
Rear frame with integrated diesel tanks
and horizontal joint of the slew ring type.
Articulated frame lock.

CAB
Anti-vibration safety cab (ROPS, FOPS according
to ISO-standard) with Lexan in all screens.
The cab features either manual or automatic
swivelling and levelling. Climate system with
automatic control (ACC) and sun-blinds. Airsprung,
electrically heated operator’s seat with
airvent, headrest, seat belt and adjustable wide
arm rests. Control panels have mini-levers with
extra push buttons. Parallel operating wiper
with interval control. Washers on the front and
side screens. Radio with CD player. Roof and
fl oor lighting with door switch. The measuring
system’s printer is integrated in the roof panel.
Swivelling ........................... +/-45
Tilting, forw., rear, side .....15°, 14°, +/- 11°
Noise level...........................65 dBA

LOADER
RK140
Parallel acting knuckle boom with tilting loader
base and 2,0 m extension.
Automatic tilt function.
Tilting angle......foreward 20° / backwards 14º
Lift torque, gross/net ........202/150 kNm
(149 000/110 600 lbf ft)
Slewing torque .......36 kNm (26 550 lbf ft)
Slewing arc ............260°
Reach ....................10,3 m (33 ft) or 12,0 m (39 ft)

HARVESTER HEAD
EGS 402 / EGS 550
Pendulum suspended with fl ange mounting in
the rotator. Delimbing unit with stem glasping
knives. The feeding device is fi tted with hydraulic
motors, mounted in wheel arms. Automatic
chain adjuster and proportional chain lubrication.

EGS 402 
Cut dia.................450 mm (18 in) 
Limb dia………….50-400 mm (2-16 in) 
Wheel open……...400 mm (16 in) 
Feed force............14,3 kN (3 200 lbf) 
Feed speed……...4,0 m/s (13 ft/s) 
Weight .................480 kg 1050 lb) 

 EGS 550
Cut dia..............550 mm(22 in)
Limb dia...........50–450 mm(2-18 in)
Wheel open......500 mm(20 in)
Feed force........23,9 kN (5 370 lbf)
Feed speed......4,0 m/s (13 ft/s)
Weight ............900 kg (1990 lb)

EGS 590
Pendulum suspended, fl ange mounted in the rotator.
Feed mechanism with 2 feed rollers in the
wheel arms and one roller fi tted in the frame.
Double limbing knife pairs of which the lower
has diameter sensors for cross calipering. The
saw unit has an integrated cylinder, automatic
chain adjuster and sensor for cutting control.
Separate chain lubrication that lubricates proportionally
to the cutting time and is adjustable via
the computer
Cutting diameter ............600 mm (24 in)
Limbing diameter............50-600 mm (2-24 in)
Wheel opening ...............650 mm (26 in)
Feed force.......................25 kN (5620 lbf)
Feed speed .....................4,0 m/sec (13 ft/s)
Weight ............................1100 kg (2425 lb)

MEASURING AND
CONTROL SYSTEM
ROTTNE D4
Microprocessor based control and cross
cutting system in PC environment with
value and distributed cross-cutting.The system
units are interconnected via a CanBus.
Communication via USB memory stick, 
modem or laptop PC.

WEIGHT AND DIMENSIONS
Weight ..................................19 990 kg (43 870 lb)
Width.....................................2 890 mm (114 in)

EQUIPMENT
Standard: Hand fi re extinguisher. Vakuum pump.
Electric fi ller pump. Service equipment with technical
documentation and complete tool kit.
Extra: Engine/cab preheater with tank heating
coil. Rear vision system. Sprinkler system.
Xenon working light. Orbitrol steering.
Computer calliper. Colour marking system.
Biodegradeable oil. Chains. Tracks.

Rottne H-14

Rätt till ändringar av specifikation och utrustningar förbehålles.
Bilderna visar inte alltid maskinen i standardutförande.